Standard Abrasives™ Surface Conditioning GP Disc
- | Select product options for IDs.
Details
Highlights
- High edge durability and flexibility
- Designed for blending, coating removal, finishing, and light deburring
- Aluminum Oxide on GP material provides high initial and extended cut rate
- Best material when low contact pressure and load resisting are required
- Most efficient on ferrous materials on both flat and contoured surfaces
- Available with Hook and Loop attachment
The Standard Abrasives™ Surface Conditioning GP Disc combines edge durability and flexibility with high initial and extended cut rate for deburring, blending and cleaning of aluminum or other soft metals.
Standard Abrasives Holder Pads
Standard Abrasives™ Surface Conditioning Discs provide a more compact structure of non-woven fibers than Buff & Blend products. Our GP disk has a woven fabric (scrim) embedded in the nylon structure to provide additional strength and durability. This helps extend the life of the disk and allows for extended use on ferrous materials or steel. This material requires very little contact pressure and has the most flexibility available.
Mixed Materials
Our Standard Abrasives™ Surface Conditioning GP Discs are made of a tough, but flexible nylon mesh that fits contoured surfaces. This mesh is also laced with aluminum oxide abrasive. Aluminum oxide discs are a good match for operators who desire an all-purpose versatility and economy. The mineral cuts fast while blending and deburring and should be used for applications on ferrous metals and composites. Aluminum oxide discs feature a premium grain with higher fracture strength, meaning the mineral will fragment and renew more readily. They are available in grades ranging from Very Fine to Coarse.
Strong Backing for Better Performance
For the best results, it is recommended that a Standard Abrasives brand holder pad is used. Tests have shown that surface conditioning disks, when used in conjunction with the Standard Abrasives holder pad, have a greater durability and performance rate. These pads also assure that pressure is applied evenly all the way to the edge of the disk. Holder pads for Quick Change Discs are available in 3 attachment styles: TS, TR and TP.
Typical properties
| Abrasive Material | Aluminum Oxide |
| Attachment Type | Hook & Loop |
| Brands | Standard Abrasives™ |
| Center Hole Diameter (Imperial) | 0.62 in, 0.87 in |
| Center Hole Diameter (Metric) | 15.748 mm, 22.098 mm |
| Grade | Coarse, Very Fine, Medium |
| Maximum Speed | 6000 rpm, 7000 rpm, 8000 rpm |
| Overall Diameter (Imperial) | 2 in, 3 in, 4 in, 4.5 in, 5 in, 6 in, 7 in |
| Overall Diameter (Metric) | 50.8 mm, 76.2 mm, 101.6 mm, 114.3 mm, 127 mm, 152.4 mm, 177.8 mm |
Resources
Safety Data Sheets
Document Number: MSDS_2828234_US_EN
(PDF)
Safety Data Sheets
Document Number: MSDS_2837243_US_EN
(PDF)
Reviews
Large Volume Order
Thank You!
Your form was submitted successfully.
Our Apologies...
An error has occurred while submitting. Please try again later...
Similar products
| Overall Diameter (Imperial) | 2 in, 3 in, 4 in, 4.5 in, 5 in, 6 in, 7 in | ||
| Overall Diameter (Metric) | 50.8 mm, 76.2 mm, 101.6 mm, 114.3 mm, 127 mm, 152.4 mm, 177.8 mm | ||
| Grade | Coarse, Very Fine, Medium | ||
| Attachment Type | Hook & Loop | ||
| Abrasive Material | Aluminum Oxide |
Standard Abrasives™ Surface Conditioning GP Disc
Scotch-Brite™ SC Surface Conditioning Disc
Scotch-Brite™ Precision Surface Conditioning DiscRelated Products
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
