3M™ Cubitron™ II Flap Disc 967A
- | Select product options for IDs.
Details
Highlights
- Ideal 3M flap disc for medium-duty applications like weld removal and surface preparation
- Built with 3M Precision-Shaped Grain for an exceptionally fast cut, helping increase productivity
- Poly-cotton backing delivers controlled, even wear in medium unit pressure applications
- Individual flaps break down, exposing fresh mineral to deliver consistent cut rate for the life of the disc
- Easy to use, with less gouging than fiber discs and bonded wheels
- Offers a great balance of fast cut and long life
3M™ Cubitron™ II Flap Disc 967A is ideal for medium-pressure applications on flat and contoured surfaces, especially in light deburring or weld leveling to prep for paint in mild steel. It’s also great for stainless steel fabrication where finish and gouge resistance are important. Powered by 3M Precision-Shaped Grain, this disc cuts fast and lasts long.
Ideal for medium-duty weld removal and surface prep
3M™ Cubitron™ II Flap Disc 967A — powered by 3M Precision-Shaped Grain and a poly-cotton backing — is well-suited for medium-duty applications including weld, scale and oxide removal, light deburring, surface preparation and blending. Along with the poly-cotton backing, this disc also features an incorporated grinding aid to help it run cool and cut efficiently on heat-sensitive metals. This all adds up to a disc that strikes a balance of fast cut and long life.
Individual flaps break down to expose fresh mineral
Flap discs are the ideal choice for a wide range of applications on a variety of metals. The abrasive flaps offer a long-lasting supply of fresh abrasives in a load-resistant design. Designed for use with a right-angle grinder (PDF, 4.70 Mb), flap discs allow you to breeze through a wide range of applications with less chance of gouging — even for less-experienced grinders.
Learn more about 3M™ Cubitron™ II Flap Discs (PDF, 2.33 Mb)
3M Precision-Shaped Grain out-cuts and outlasts conventional abrasive grain
3M™ Cubitron™ II Flap Disc 967A features our proprietary 3M Precision-Shaped — a grain design that continually fractures into sharp points that slice cleanly through metal, unlike traditional abrasives which tend to plow through the substrate. The grains fracture evenly and continuously expose new sharp edges to keep the disc cutting efficiently. The result is that 3M™ Cubitron™ II products out-cut and outlast conventional ceramic industrial abrasives.
Applications
- Weld removal
- Light deburring
- Scale removal
- Oxide removal
- Surface prep
- Blending
Typical properties
Resources
Reviews
Large Volume Order
Similar products
| Overall Diameter (Imperial) | 4.5 in, 7 in, 4 in, 5 in | ||
| Overall Diameter (Metric) | 114.3 mm, 177.8 mm, 101.6 mm, 127 mm | ||
| Disc Type | T29, T27 | ||
| Center Hole Diameter (Imperial) | 0.875 in, 0.625 in | ||
| Center Hole Thread Size | 5/8"-11, 3/8"-24 | ||
| Center Hole Diameter (Metric) | 22.225 mm, 15.875 mm |
3M™ Cubitron™ II Flap Disc 967A
3M™ Grinder
3M™ Abrasive Power Tool - Replacement PartsFor industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
