1. United States
  2. All 3M Products
  3. Electrical
  4. Wire & Cable
  5. Tubing & Molded Parts
  6. Heat Shrink Tubing
  7. 3M™ Modified Polyvinylidene Flouride Heat Shrink Tubing MFP

3M™ Modified Polyvinylidene Flouride Heat Shrink Tubing MFP

  • Options available
  • | Select product options for IDs.

Transparent insulation for easy, see-through inspection and identification

Offers shrink-fit protection and strain relief of wires, solder joints, terminals and connections

Suitable for marking electronics and appliances

View more details
Frequently viewed resources
PDF (1) Copy 26Tech Data Sheet (PDF, 57KB)
icn_down_arrow
icn_down_arrow
icn_down_arrow
icn_down_arrow
icn_down_arrow
icn_down_arrow

Select product options

Details

Highlights
  • Transparent insulation for easy, see-through inspection and identification
  • Offers shrink-fit protection and strain relief of wires, solder joints, terminals and connections
  • Suitable for marking electronics and appliances
  • Made of clear semi-rigid, modified polyvinylidene fluoride
  • Withstands temperatures of -67 to 347 degrees F (-55 to 175 degrees C)
  • Flame-retardant tubing is rated for 600V applications

3M™ Heat Shrink Tubing MFP is a thin wall tubing that provides a high degree of mechanical strength and high temperature resistance. This tubing has a 2:1 shrink ratio and provides flame retardant insulation for 600V rated applications. It has semi rigid, modified polyvinylidene fluoride construction that offers superior abrasion resistance and cut through properties.

3M™ Heat Shrink Tubing MFP is transparent for easy, see through inspection and identification. This flame retardant tubing is used for shrink fit protection and strain relief of wires, solder joints, terminals, as well as connections. The high expansion ratio tubing is mechanically tough, easily markable and resists cold flow. It is perfect for use in military aircraft or vehicles and jacketing components like resistors or capacitors. It withstands temperatures of 67 to 347 degrees F ( 55 to 175 degrees C). UL Listed, SAE AS23053/8, AMS 3632, CSA, OFT Certified and RoHS 2011/65/EU Compliant.

Typical properties

Applicable SAE-AMS-DTL-23053 Specifications

23053/8 and 23053/18 class 1

Elongation

350 %, 350 Decibel

Expanded Inner Diameter

0.06 in, 0.125 in, 0.375 in, 0.5 in

Expanded Inner Diameter (Metric)

1.17 mm, 1.6 mm, 2.36 mm, 3.18 mm, 4.75 mm, 6.35 mm, 9.53 mm, 12.70 mm, 19.05 mm, 25.40 mm

Flammability Rating

UL 224 VW-1 / CSA Oft

Heat Shrink Type

Specialty Polymer Tubing

Inner Diameter After Shrink (Imperial)

0.02 in, 0.023 in, 0.03 in, 0.031 in, 0.046 in, 0.06 in, 0.062 in, 0.093 in, 0.125 in, 0.187 in, 0.195 in, 0.25 in, 0.312 in, 0.375 in, 0.5 in

Inner Diameter After Shrink (Metric)

0.58 mm, 0.79 mm, 0.8 mm, 1.17 mm, 1.52 mm, 1.57 mm, 2.36 mm, 3.18 mm, 4.75 mm, 5 mm, 6.35 mm, 7.93 mm, 9.53 mm, 12.7 mm, 58 mm

Inner Diameter Before Shrink (Imperial)

0.04 in, 0.046 in, 0.06 in, 0.063 in, 0.093 in, 0.125 in, 0.187 in, 0.25 in, 0.375 in, 0.5 in, 0.625 in, 0.75 in, 1 in

Inner Diameter Before Shrink (Metric)

1.17 mm, 1.6 mm, 2.36 mm, 3.18 mm, 4.75 mm, 4.8 mm, 6.35 mm, 9.53 mm, 12.7 mm, 15.87 mm, 19.05 mm, 25.4 mm

Material

Polyvinylidene Fluoride

Maximum Operating Temperature (Celsius)

135 ℃, 175 ℃

Maximum Operating Temperature (Fahrenheit)

230 ℉, 275 ℉, 347 ℉

Mil Spec

AMS-DTL-23053/8 and AMS-DTL-23053/18, Class 1

Minimum Expanded Tubing I. D.

0.04 in, 0.063 in, 0.125 in, 0.187 in, 0.25 in, 0.375 in, 0.5 in, 1 in, 3 in, 5 in

Non-Corrosive

Yes

Operating Temperature Range (Celsius)

-55 °C to +175 °C

Operating Temperature Range (Fahrenheit)

-67 °F to 375 °F

Product Color

Transparent

Product Form

48 in (1.22 m) sticks, 48 in (1.22 m) sticks with header label, 6 in (15.24 cm) pieces, Stick

Recovered Inner Diameter

0.02 in, 0.03 in, 0.05 in, 0.06 in, 0.09 in, 0.093 in, 0.125 in, 0.13 in, 0.187 in, 0.19 in, 0.25 in, 0.31 in, 0.38 in, 1 in

Recovered Inner Diameter (Metric)

0.58 mm, 0.8 mm, 1.17 mm, 1.57 mm, 2.36 mm, 3.175 mm, 3.18 mm, 4.7498 mm, 4.75 mm, 6.4 mm, 7.9 mm, 9.52 mm, 12.7 mm

Recovered Inner Diameter Millimetres

0.79 mm, 1.57 mm, 2.36 mm, 3.18 mm, 4.75 mm, 6.35 mm

Shrink Ratio

2:1

Size (Metric)

1.17 mm, 1.59 mm, 2.38 mm, 3.18 mm, 4.75 mm, 6.35 mil, 6.35 mm, 9.52 mil, 9.52 mm, 12.7 mm, 15.88 mm, 19.05 mm, 25.4 mm

Tubing Type

Special Purpose, Polyvinylidene Fluoride

UL Bug Temperature (Fahrenheit)

301 Degrees Fahrenheit

UL Bug Voltage

600 Volt

Units per Case

5.0, 12.0, 25.0, 30.0, 50.0, 100.0, 125.0, 250.0

Overall Length (Imperial)

4 in, 6 ft, 48 in

Overall Length (Metric)

1219 mm

Resources

Regulatory Data Sheet

Document Number: MSDS_0646448_US_EN_RDS

(PDF)

Contact a Sales Rep

  • All fields are required unless indicated optional.

  • Select One
  • United States
  • Select One
  • Select One
  • Select One
  • Select One
  • Select One
  • Select One
  • Select One
  • Submit

Thank You!

Your form was submitted successfully.

Our Apologies...

An error has occurred while submitting. Please try again later...

Similar products

Inner Diameter After Shrink (Metric) 0.58 mm, 0.79 mm, 0.8 mm, 1.17 mm, 1.52 mm, 1.57 mm, 2.36 mm, 3.18 mm, 4.75 mm, 5 mm, 6.35 mm, 7.93 mm, 9.53 mm, 12.7 mm, 58 mm
Maximum Operating Temperature (Fahrenheit) 230 ℉, 275 ℉, 347 ℉
Inner Diameter Before Shrink (Metric) 1.17 mm, 1.6 mm, 2.36 mm, 3.18 mm, 4.75 mm, 4.8 mm, 6.35 mm, 9.53 mm, 12.7 mm, 15.87 mm, 19.05 mm, 25.4 mm
Maximum Operating Temperature (Celsius) 135 ℃, 175 ℃
Inner Diameter After Shrink (Imperial) 0.02 in, 0.023 in, 0.03 in, 0.031 in, 0.046 in, 0.06 in, 0.062 in, 0.093 in, 0.125 in, 0.187 in, 0.195 in, 0.25 in, 0.312 in, 0.375 in, 0.5 in
Inner Diameter Before Shrink (Imperial) 0.04 in, 0.046 in, 0.06 in, 0.063 in, 0.093 in, 0.125 in, 0.187 in, 0.25 in, 0.375 in, 0.5 in, 0.625 in, 0.75 in, 1 in
Manufacturing Origin: USA

The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.

Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.