3M™ Heat Shrink Tubing ITCSF
- | Select product options for IDs.
Details
Highlights
- Provides better mechanical protection
- Offers shrink-fit electrical insulation
- Suitable for insulating electrical splices, connections and terminations
- Made of black cross-linked polyolefin
- Withstands temperatures of -67 to 230 degrees F (-55 to 110 degrees C)
- Flame-retardant
3M™ Heat Shrink Cable Sleeve ITCSF is a flexible, thick wall sleeve that provides a high degree of mechanical strength. This sleeve has a 3:1 shrink ratio to offer flame retardant insulation for 1 kV rated applications. It has a cross linked polyolefin construction that provides moisture seal protection.
3M™ Heat Shrink Cable Sleeve ITCSF is a split resistant sleeve with a factory applied, adhesive/sealant to offer reliable performance for electrical splices, connections and terminations. It withstands temperatures of 67 to 230 degrees F ( 55 to 110 degrees C). UL Listed, CSA Certified, ABS, MSHA Approved and RoHS 2011/65/EU Compliant.
Typical properties
Resources
Similar products
| Inner Diameter After Shrink (Metric) | 9.4 mm, 16.5 mm, 3.8 mm, 5.1 mm | |||
| Maximum Operating Temperature (Fahrenheit) | 230 ℉ | |||
| Inner Diameter Before Shrink (Metric) | 27.9 mm, 50.8 mm, 10.2 mm, 20.3 mm | |||
| Maximum Operating Temperature (Celsius) | 110 ℃, 100 ℃ | |||
| Inner Diameter After Shrink (Imperial) | 0.37 in, 0.65 in, 0.15 in, 0.2 in | |||
| Inner Diameter Before Shrink (Imperial) | 1.1 in, 2 in, 0.4 in, 0.8 in |
3M™ Heat Shrink Tubing ITCSF
3M™ Heat Shrinkable Splice Jacket Kit HSJ 
3M™ Heat Shrink Tubing HDCW
3M™ Heat Shrink Thin-Wall Flexible Polyolefin Tubing FP-301 Legal disclaimer
Manufacturing Origin: USA
The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.
Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.
Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
