3M™ Scotchlok™ Nylon Fully Insulated with Insulation Grip Male Disconnects
- | Select product options for IDs.
Details
Highlights
- This male disconnect terminal offers excellent holding force
- Allows for quick and easy disconnect of wires
- Made of electrolytic copper for good conductivity and has corrosion-resistant tin plating
- Withstands a temperature range of -40 to 221 degrees F (-40 to 105 degrees C)
- Rated 600V for building wire and 1000V for signs, fixtures or luminaires
- UL Listed, CSA Certified and RoHS 2011/65/EU Compliant
3M™ Scotchlok™ Color-Coded Male Disconnect Terminal offers superior holding force while allowing for quick and easy disconnect. The terminal has a fully insulated, nylon, butted-seam barrel and withstands temperatures of -40 to 221 degrees F (-40 to 105 degrees C). Its electrolytic copper construction offers good conductivity and a tin-plated finish resists corrosion.
3M™ Scotchlok™ Color-Coded Male Disconnect Terminal attaches to the mating part with a tongue that slips over the female tab. This terminal has a butted-seam barrel which is covered by a funnel-designed, seamless brass sleeve to guide the wire into position. The nylon-sleeve is abrasion-resistant, fully insulated and flared to allow a positive grip. Its stepped design ensures mistake-proof crimping. UL Listed, CSA Certified and RoHS 2011/65/EU Compliant.
Typical properties
Resources
Similar products
| Connection Width (Metric) | 6.35 mm, 4.75 mm | |||
| Connection Width (Imperial) | 0.25 in, 0.187 in | |||
| Maximum Conductor Size (Imperial) | 10 AWG, 18 AWG, 14 AWG | |||
| Maximum Conductor Size (Metric) | 6 mm², 1 mm², 2.5 mm² | |||
| Minimum Conductor Size (Metric) | 4 mm², .34 mm², 1.5 mm² | |||
| Minimum Conductor Size (Imperial) | 12 AWG, 22 AWG, 16 AWG |
3M™ Scotchlok™ Nylon Fully Insulated with Insulation Grip Male Disconnects
3M™ Scotchlok™ Nylon Fully Insulated Interlock Barrel Female Disconnects
3M™ Scotchlok™ Nylon Fully Insulated with Insulation Grip Interlock Barrel Female Disconnects
3M™ Scotchlok™ Heat Shrink Nylon Fully Insulated Butted Seam Male DisconnectsLegal disclaimer
Manufacturing Origin: USA
The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.
Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.
Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
