3M™ Heat Shrink Tubing SMS
- | Select product options for IDs.
Details
Highlights
- Specially designed for automotive wire harnesses
- Flame-retardant
- Suitable for insulation of RV, truck, tractor, heavy equipment and marine wire splices, in-line components, fusible links and terminals
- Made of semi-rigid polyolefin with colored squares
- Withstands temperatures of -67 to 230 degrees F (-55 to 110 degrees C)
- RoHS 2011/65/EU Compliant
3M™ Heat Shrink Tubing SMS is a dual wall tubing that is specially designed for automotive wire harnesses. This tubing has a 4:1 shrink ratio and semi rigid polyolefin construction with an internal layer of thermoplastic adhesive offers moisture seal protection.
3M™ Heat Shrink Tubing SMS is color coded for quick and easy identification of the wire. This flame retardant tubing is puncture resistant and offers good strain relief as well as mechanical protection. It is ideal for insulation of automotive, RV, truck, tractor, heavy equipment and marine wire splices, in line components, fusible links and terminals. It withstands temperatures of 67 to 230 degrees F ( 55 to 110 degrees C).
Typical properties
Resources
Similar products
| Inner Diameter After Shrink (Metric) | 1.53 mm, 1.14 mm, 4.44 mm, 2.03 mm, 2.67 mm | |||
| Maximum Operating Temperature (Fahrenheit) | 230 ℉ | |||
| Inner Diameter Before Shrink (Metric) | 7.62 mm, 5.59 mm, 17.78 mm, 8.89 mm, 11.43 mm | |||
| Maximum Operating Temperature (Celsius) | 110 ℃ | |||
| Inner Diameter After Shrink (Imperial) | 0.06 in, 0.045 in, 0.175 in, 0.08 in, 0.105 in | |||
| Inner Diameter Before Shrink (Imperial) | 0.3 in, 0.22 in, 0.7 in, 0.35 in, 0.45 in |
3M™ Heat Shrink Tubing SMS
3M™ Heat Shrinkable Splice Jacket Kit HSJ 
3M™ Heat Shrink Tubing HDCW
3M™ Heat Shrink Thin-Wall Flexible Polyolefin Tubing FP-301 Legal disclaimer
Manufacturing Origin: USA
The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.
Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.
Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
