Contact a Sales Rep
Thank You!
Your form was submitted successfully.
Our Apologies...
An error has occurred while submitting. Please try again later...
3M™ Scotchlok™ Nylon Fully Insulated Butted Seam Male Disconnects
- | Select product options for IDs.
Details
Highlights
- Nylon-insulated, butted-seam barrel offers easy insertion of wires
- This male disconnect terminal offers excellent holding force
- Allows for quick and easy disconnect of wires
- Made of electrolytic copper for good conductivity and has corrosion-resistant tin plating
- Withstands a temperature range of -40 to 221 degrees F (-40 to 105 degrees C)
- Rated 600V for building wire and 1000V for signs, fixtures or luminaires
- UL Listed, CSA Certified and RoHS 2011/65/EU Compliant
This terminal has a wire range of 12-10 AWG and has case quantities of 500 per case.
The disconnects are attached to mating part by tongue of female part slipping over male tab. The use of dents and rolled edges on female part provides excellent holding force while allowing easy and quick disconnect.
Typical properties
| Barrel Inside Diameter | 0.065 Inch, 0.080 Inch, 0.08 Inch, 0.085 Inch, 0.15 Inch, 0.150 Inch |
| Barrel Length (Imperial) | 0.24 Inch, 0.25 Inch |
| Barrel Style | Butted |
| CSA File Number | LR22190 |
| Connection Width (Imperial) | 0.187 in, 0.25 in |
| Connection Width (Metric) | 4.75 mm, 6.35 mm |
| Diameter (D) | 0.3 Inch, 0.30 Inch, 0.39 Inch |
| Disconnect Type | Male |
| Fastener Orientation | Male |
| Grease Filling Against Corrosion | No |
| Insulation Color | Red, Blue, Yellow |
| Insulation Material | Nylon |
| Interrupt Free Shifting | No |
| Male Tab Width (W') | 0.187 Inch, 0.25 Inch, 0.250 Inch |
| Material | ETP Copper, Plastic |
| Max. Number of Cores | 1 |
| Maximum Conductor Size (Imperial) | 10 AWG, 14 AWG, 18 AWG |
| Maximum Conductor Size (Metric) | 1 mm², 2.5 mm², 6 mm² |
| Maximum Insulation Outer Diameter (Imperial) | 0.145 in, 0.17 in, 0.25 in |
| Maximum Insulation Outer Diameter (Metric) | 3.7 mm |
| Maximum Operating Temperature (Celsius) | 105 ℃ |
| Maximum Operating Temperature (Fahrenheit) | 221 ℉ |
| Maximum Recommended Voltage Rating | 600 V |
| Minimum Conductor Size (Imperial) | 12 AWG, 16 AWG, 22 AWG |
| Minimum Conductor Size (Metric) | .34 mm², 1.5 mm², 4 mm² |
| Operating Temperature Range (Celsius) | -40 °C to 105 °C |
| Pad Width | 0.187 in, 0.25 in |
| Product Color | Red, Blue, Yellow |
| Tab Width | 0.110, 0.187, 0.250 |
| Terminal Style | Fully Insulated |
| Terminal Type | Disconnect |
| UL File Number | E70512 |
| Units per Case | 500.0, 1000.0 |
| Voltage Application | Low Voltage |
| Overall Diameter (Imperial) | 0.3 in, 0.39 in |
| Overall Diameter (Metric) | 9.9 mm |
| Overall Length (Imperial) | 0.87 in, 0.95 in, 1.05 in |
| Overall Length (Metric) | 22 mm, 22.098 mm, 24.13 mm, 26.67 mm |
| Overall Width (Imperial) | 0.37 in, 0.44 in, 0.47 in |
| Overall Width (Metric) | 9.39 mm, 9.398 mm, 11.17 mm, 11.93 mm |
Resources
Regulatory Data Sheet
Document Number: MSDS_3514692_US_EN_RDS
(PDF)
Regulatory Data Sheet
Document Number: MSDS_3276466_US_EN_RDS
(PDF)
Regulatory Data Sheet
Document Number: MSDS_3514411_US_EN_RDS
(PDF)
Similar products
| Connection Width (Metric) | 4.75 mm, 6.35 mm | |||
| Connection Width (Imperial) | 0.187 in, 0.25 in | |||
| Maximum Conductor Size (Imperial) | 10 AWG, 14 AWG, 18 AWG | |||
| Maximum Conductor Size (Metric) | 1 mm², 2.5 mm², 6 mm² | |||
| Minimum Conductor Size (Metric) | .34 mm², 1.5 mm², 4 mm² | |||
| Minimum Conductor Size (Imperial) | 12 AWG, 16 AWG, 22 AWG |
3M™ Scotchlok™ Nylon Fully Insulated Butted Seam Male Disconnects
3M™ Scotchlok™ Nylon Fully Insulated Interlock Barrel Female Disconnects
3M™ Scotchlok™ Nylon Fully Insulated with Insulation Grip Interlock Barrel Female Disconnects
3M™ Scotchlok™ Nylon Fully Insulated with Insulation Grip Male DisconnectsLegal disclaimer
Manufacturing Origin: USA
The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.
Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.
Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
