Contact a Sales Rep
Thank You!
Your form was submitted successfully.
Our Apologies...
An error has occurred while submitting. Please try again later...
3M™ Scotchlok™ Vinyl Insulated Butted Seam Parallel Connectors
- | Select product options for IDs.
Typical properties
| Barrel Inside Diameter | 0.090 in |
| Barrel Length (Imperial) | 0.30 Inch |
| Barrel Style | Butted Seam |
| Body Material | Copper Alloy |
| Connector Type | Butt |
| Cu Stranded Wire Combinations | 1 #16 to 1 #16, 1 #18 to 1 #18, 16, 14, 1 #20 to 1 #20, 18, 16, 14, 1 #22 to 1 #22, 20, 18, 16, 14 |
| Insulated | Yes |
| Insulation Color | Blue |
| Insulation Material | Vinyl |
| Maximum Conductor Size (Imperial) | 10 AWG, 16 AWG, 18 AWG |
| Maximum Conductor Size (Metric) | 1 mm², 1.5 mm², 6 mm² |
| Maximum Insulation Outer Diameter (Imperial) | 0.17 in |
| Maximum Voltage Rating | 600 to 1000 V |
| Minimum Conductor Size (Imperial) | 12 AWG, 14 AWG, 22 AWG |
| Minimum Conductor Size (Metric) | .34 mm², 2.5 mm², 4 mm² |
| Minimum Stud Diameter (Imperial) | 0.19 in |
| Minimum Stud Diameter (Metric) | 5 mm |
| Operating Temperature Range (Celsius) | -40 °C to 105 °C |
| Operating Temperature Range (Fahrenheit) | -40 °F to 221 °F |
| Solution for | Wireless Network: Infrastructure Accessories |
| Terminal Material | Tin-Plated Electrolytic Copper |
| Terminal Type | Parallel Connector |
| Units per Case | 1000.0 |
| Overall Length (Imperial) | 0.67 in, 0.87 in |
Resources
Regulatory Data Sheet
Document Number: MSDS_3544061_US_EN_RDS
(PDF)
Regulatory Data Sheet
Document Number: MSDS_3546827_US_EN_RDS
(PDF)
Legal disclaimer
Manufacturing Origin: USA
The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.
Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.
Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
