3M™ Scotchlite™ Reflective Material 8712 Series
- | Select product options for IDs.
Details
Highlights
- Compliant brightness designed for enhancing visibilty of wearer in low light and nighttime conditions
- Certified to various global high visibility standards such as ANSI/ISEA 107
- Standard product has a “3M” image on its reflective surface, but can be purchased without it
- Performs best when laminated to woven polyester and polyester blend fabrics
- Should not be used on knitted T-shirts or 100% cotton fabrics where good adhesion is required for extended use
- Heat transfer application
3M™ Scotchlite™ Reflective Material 8712 Series is composed of wide-angle, exposed retroreflective lenses bonded to a heat-activated adhesive. This material is printed with 3M trademarks for easy identification that your product selection is a genuine, quality product.
When properly used, reflective material helps enhance wearer visibility at night time or in low light conditions when illuminated by a light source, such as headlights, by reflecting the incident light and focusing it back towards the original source.
Typical properties
| Adhesive | Heat Activated Polyurethane |
| Attachment Type | Heat Transfer |
| Backing | Heat Activated Polyurethane, Heat Activated Polyester |
| Brands | Scotchlite™ |
| Daytime Color | Silver |
| Dry-Cleaning Cycles at ANSI Certified Standards | 25, 30 |
| Dry-Cleaning Cycles per ANSI 107-2015 | 25 |
| Flame Resistant | No |
| Home Wash Cycles 60°C (140°F) at ANSI Certified Standards | 25 |
| Initial Average RA | 500 |
| Product Color | Silver |
| Recommended Industry | Utilities, Oil & Gas, Mining |
| Technology | Beaded |
| Wash Cycles per ANSI 107-2015 | 25 |
| Wash Method | Home Wash |
| Overall Length (Imperial) | 109.36 yd, 218.72 yd, 218.723 yd, 250 yd |
| Overall Length (Metric) | 50 m, 100 m, 200 m, 228.6 m, 914.4 m |
| Overall Width (Imperial) | 0.5 in, 0.75 in, 1 in, 1.5 in, 2 in, 2.20472 in, 24 in |
| Overall Width (Metric) | 5 mm, 9.53 mm, 12.7 mm, 19.05 mm, 25.4 mm, 38.1 mm, 50.8 mm, 56 mm, 304.8 mm, 609.6 mm, 635 mm, 914.4 mm, 1270 mm |
Resources
Regulatory Data Sheet
Document Number: MSDS_3532595_US_EN_RDS
(PDF)
Large Volume Order
Thank You!
Your form was submitted successfully.
Our Apologies...
An error has occurred while submitting. Please try again later...
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. If this product is being purchased for use in firefighting duties, please review this Notice Regarding Fluorinated Organic Compounds.
