3M™ Scotchcast™ Inline Resin Power Cable Splice Kits 82-AN Series
- | Select product options for IDs.
Details
Highlights
- Excellent multi-purpose moisture sealing resin
- Tough and oil resistant
- Insulates and seals unshielded, single conductor cables and multiple conductor cables
- Splices non-shielded submersible cables
- Designed for weather-exposed or direct burial locations
- Rated for 5 kV and 1 kV cables
- Bonds to itself and to most modern cable jackets
- UL Listed and RoHS 2011/65/EU Compliant
3M™ Scotchcast™ Inline Resin Power Cable Splice Kits 82-AN Series is designed to insulate and seal 5kV rated unshielded, single conductor cables and 1 kV rated multiple conductor cables. It is suitable for use in weather exposed or direct burial locations.
3M™ Scotchcast™ Inline Resin Power Cable Splice Kits 82-AN Series includes a mold body, pouring spouts, Scotch® Rubber Splicing Tape 23 and 3M™ Scotchcast™ Electrical Insulating Resin 4N. It is perfect for splicing non-shielded submersible cables and single conductor or multiple conductor portable cables. UL listed for direct burial and submerged applications up to 600V and 90 °C. For use with UL listed connectors only. RoHS 2011/65/EU Compliant.
Typical properties
Resources
Similar products
| Conductor Sizes (Imperial) | 3/0 AWG, 400 kcmil, 2 AWG, 10 AWG | |||
| Insulation Outside Diameter Range | 1.00 - 1.563 Inch, 0.625 - 1.00 Inch, 0.406 - 0.625 Inch, 0.406 - 0.750 Inch | |||
| Maximum Insulation Outer Diameter (Metric) | 39.688 mm, 25.4 mm, 15.875 mm | |||
| Minimum Insulation Outer Diameter (Metric) | 25.4 mm, 15.875 mm, 10.312 mm | |||
| Minimum Insulation Outer Diameter (Imperial) | 1 in, 0.625 in, 0.406 in | |||
| Maximum Insulation Outer Diameter (Imperial) | 1.562 in, 1 in, 0.625 in |
3M™ Scotchcast™ Inline Resin Power Cable Splice Kits 82-AN Series
3M™ Scotchcast™ Spacer Tape P-3, 1-1/2 in X 27 ft (38,1 mm x 8,23 m), 50 rolls/case
3M™ Scotchcast™ Flexible Power Cable Splicing Kits 82-F Series
3M™ Wye Resin Splice KitsLegal disclaimer
The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.
Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
