Contact a Sales Rep
Thank You!
Your form was submitted successfully.
Our Apologies...
An error has occurred while submitting. Please try again later...
3M™ Highland™ Vinyl Insulated Butted Seam Male Disconnects
- | Select product options for IDs.
Details
Highlights
- Vinyl-insulated, butted-seam barrel with a funnel-designed, polyvinyl chloride sleeve allows for easy insertion of wires
- This male disconnect terminal offers excellent holding force
- Allows for quick and easy disconnect of wires
3M™ Highland™ Vinyl Insulated Butted Seam Male Disconnect offers superior holding force while allowing for quick and easy disconnect. The terminal has a vinyl-insulated, butted-seam barrel and withstands temperatures of -40 to 221 degrees F (-40 to 105 degrees C). Its electrolytic copper construction offers good conductivity and a tin-plated finish resists corrosion.
3M™ Highland™ Vinyl Insulated Butted Seam Male Disconnect attaches to the mating part with a tongue that slips over the female tab. It has a butted-seam barrel that is covered by a funnel-designed, rigid-molded, polyvinyl chloride sleeve which serves to guide the wire into position. The polyvinyl chloride sleeve provides electrical contacts and mechanical stress relief at the point of insulation. The vinyl-sleeve insulation is abrasion-resistant and flared to ensure easy crimping. UL Listed, CSA Certified and RoHS 2011/65/EU Compliant.
Typical properties
| Barrel Inside Diameter | 0.065 Inch, 0.08 Inch, 0.085 Inch, 0.15 Inch |
| Barrel Length (Imperial) | 0.24 Inch, 0.25 Inch |
| Barrel Length (Metric) | 6.35 mm |
| Barrel Style | Butted |
| CSA File Number | LR22190 |
| Connection Width (Imperial) | 0.187 in, 0.25 in |
| Connection Width (Metric) | 4.75 mm, 6.35 mm |
| Disconnect Type | Male |
| Fastener Orientation | Male |
| Insulation Material | Vinyl |
| Material | Plastic |
| Mates with Female Width | 0.187 Inch, 0.25 Inch |
| Mates with Male Tab Width (W') | 0.187 Inch, 0.25 Inch |
| Max. Number of Cores | 425 |
| Maximum Conductor Size (Imperial) | 10 AWG, 14 AWG, 18 AWG |
| Maximum Conductor Size (Metric) | 1 mm², 2.5 mm², 6 mm² |
| Maximum Insulation Outer Diameter (Imperial) | 0.145 in, 0.17 in, 0.25 in |
| Maximum Insulation Outer Diameter (Metric) | 3.7 mm |
| Maximum Insulation Outside Diameter | 0.145 in |
| Maximum Recommended Voltage Rating | 600 V |
| Maximum Voltage Rating | 600 to 1000 V |
| Minimum Conductor Size (Imperial) | 12 AWG, 16 AWG, 22 AWG |
| Minimum Conductor Size (Metric) | .34 mm², 1.5 mm², 4 mm² |
| Pad Width | 0.187 in, 0.25 in |
| Product Color | Blue |
| Solution for | Wireless Network: Infrastructure Accessories |
| Tab Width | 0.110, 0.187, 0.250 |
| Terminal Style | Standard |
| Terminal Type | Disconnect |
| UL File Number | E70512 |
| Units per Case | 10.0 |
| Units per bag | 25 |
| Overall Length (Imperial) | 0.85 in, 0.93 in, 1.05 in |
| Overall Length (Metric) | 23.622 mm |
| Overall Width (Imperial) | 0.25 in |
| Overall Width (Metric) | 6.35 mm |
Resources
Regulatory Data Sheet
Document Number: MSDS_3691953_US_EN_RDS
(PDF)
Regulatory Data Sheet
Document Number: MSDS_3692043_US_EN_RDS
(PDF)
Regulatory Data Sheet
Document Number: MSDS_3692159_US_EN_RDS
(PDF)
Regulatory Data Sheet
Document Number: MSDS_3277142_US_EN_RDS
(PDF)
Similar products
| Connection Width (Metric) | 4.75 mm, 6.35 mm | |||
| Connection Width (Imperial) | 0.187 in, 0.25 in | |||
| Maximum Conductor Size (Imperial) | 10 AWG, 14 AWG, 18 AWG | |||
| Maximum Conductor Size (Metric) | 1 mm², 2.5 mm², 6 mm² | |||
| Minimum Conductor Size (Metric) | .34 mm², 1.5 mm², 4 mm² | |||
| Minimum Conductor Size (Imperial) | 12 AWG, 16 AWG, 22 AWG |
3M™ Highland™ Vinyl Insulated Butted Seam Male Disconnects
3M™ Scotchlok™ Vinyl Insulated Interlock Barrel Female Disconnects
3M™ Scotchlok™ Vinyl Insulated Butted Seam Bullet-Style Male Disconnects
3M™ Scotchlok™ Vinyl Insulated Butted Seam Piggy-Back DisconnectsLegal disclaimer
Manufacturing Origin: USA
The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.
Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.
Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
