Contact a Sales Rep
Thank You!
Your form was submitted successfully.
Our Apologies...
An error has occurred while submitting. Please try again later...
3M™ Scotchlok™ Nylon Insulated with Insulation Grip Piggy-Back Disconnect terminal has a tongue portion with fingers that grip a male quick-slide and a tongue extension that is to be gripped by a female quick-slide. This is a multi-stack disconnect terminal with a nylon-insulated, butted-seam barrel. It has durable brass construction for good conductivity and a tin-plated finish for corrosion resistance.
3M™ Scotchlok™ Nylon Insulated with Insulation Grip Piggy-Back Disconnect terminal provides permanent electrical and mechanical connection to a pre-stripped end of a stranded copper wire. It is rated 300V for building wire. The terminal has a butted-seam barrel that is covered by a funnel-designed, seamless brass sleeve to guide the wire into position. The nylon-sleeve insulation is abrasion-resistant and flared to ensure a positive grip. This terminal withstands temperatures of -40 to 221 degrees F (-40 to 105 degrees C). RoHS 2011/65/EU Compliant.
Barrel Inside Diameter | 0.09 Inch |
Barrel Length (Imperial) | 0.23 Inch |
Barrel Style | Insulation Grip |
Connection Width (Imperial) | 0.25 in |
Connection Width (Metric) | 6.35 mm |
Disconnect Type | Female|Male, Male |
Fastener Orientation | Male-Female |
Insulation Color | Red |
Insulation Material | Nylon with Insulation Grip, Nylon |
Mates with Female Width | 0.25 Inch, 0.250 Inch |
Mates with Male Tab Width (W') | 0.25 Inch, 0.250 Inch |
Maximum Conductor Size (Imperial) | 14 AWG |
Maximum Conductor Size (Metric) | 2.5 mm² |
Maximum Insulation Outer Diameter (Imperial) | 0.15 in, 0.19 in |
Maximum Insulation Outer Diameter (Metric) | 3.7 mm |
Maximum Insulation Outside Diameter | 0.145 in |
Maximum Operating Temperature (Celsius) | 105 ℃ |
Maximum Operating Temperature (Fahrenheit) | 221 ℉ |
Maximum Recommended Voltage Rating | 820 V |
Minimum Conductor Size (Imperial) | 16 AWG |
Minimum Conductor Size (Metric) | 1.5 mm² |
Pad Width | 0.25 in |
Tab Width | 0.250 |
Terminal Style | Piggy-back |
Terminal Type | Disconnect |
Units per Case | 500.0, 1000.0 |
Overall Length (Imperial) | 0.91 in |
Regulatory Data Sheet
Document Number: MSDS_3545365_US_EN_RDS
(PDF)
Your form was submitted successfully.
An error has occurred while submitting. Please try again later...
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.