Contact a Sales Rep
Thank You!
Your form was submitted successfully.
Our Apologies...
An error has occurred while submitting. Please try again later...
3M™ Scotchlok™ Non-Insulated Butted Seam Male Disconnects
- | Select product options for IDs.
Details
Highlights
- Non-insulated, butted-seam barrel with a beveled mouth offers easy insertion of wires
- This male disconnect terminal offers excellent holding force
- Allows for quick and easy disconnect of wires
- Accommodates wire sizes 16 to 14 AWG
- Made of electrolytic copper for good conductivity and has corrosion-resistant tin plating
3M™ Scotchlok™ Non-Insulated Butted Seam Male Disconnect terminal offers superior holding force while allowing for quick and easy disconnect. The terminal has a non-insulated, butted-seam barrel and withstands a maximum temperature of 347 degrees F (175 degrees C). Its electrolytic copper construction offers good conductivity and a tin-plated finish resists corrosion.
3M™ Scotchlok™ Non-Insulated Butted Seam Male Disconnect terminal attaches to the mating part with a tongue that slips over the female tab. It has a non-insulated, butted-seam barrel and a beveled mouth to easily guide the wire into position. UL Listed, CSA Certified and RoHS 2011/65/EU Compliant.
Typical properties
| Barrel Inside Diameter | 0.065 Inch, 0.08 Inch, 0.085 Inch, 0.09 Inch, 0.15 Inch, 0.150 Inch |
| Barrel Length (Imperial) | 0.19 Inch, 0.24 Inch, 0.25 Inch |
| Barrel Style | Butted, Insulation Grip |
| Bullet Diameter | 0.156, 0.180 |
| CSA File Number | LR22190 |
| Connection Width (Imperial) | 0.156 in, 0.187 in, 0.25 in |
| Connection Width (Metric) | 3.962 mm, 4.75 mm, 6.35 mm |
| Disconnect Type | Male |
| Fastener Orientation | Male |
| Insulation Material | Non-insulated, Nylon |
| Male Tab Width (W') | 0.187 Inch, 0.250 Inch, 0.25 Inch |
| Mating Snap Diameter (S) | 0.156 Inch |
| Maximum Conductor Size (Imperial) | 10 AWG, 14 AWG, 18 AWG |
| Maximum Conductor Size (Metric) | 1 mm², 2.5 mm², 6 mm² |
| Maximum Insulation Outer Diameter (Imperial) | 0.19 in |
| Minimum Conductor Size (Imperial) | 12 AWG, 16 AWG, 22 AWG |
| Minimum Conductor Size (Metric) | .34 mm², 1.5 mm², 4 mm² |
| Pad Width | 0.156 in, 0.187 in, 0.25 in |
| Solution for | Wireless Network: Infrastructure Accessories |
| Tab Width | 0.187, 0.250 |
| Terminal Style | Standard, Bullet Snap Plug |
| Terminal Type | Disconnect |
| UL File Number | E70512 |
| Units per Case | 500.0, 1000.0 |
| Overall Length (Imperial) | 0.064 in, 0.64 in, 0.73 in, 0.75 in, 0.87 in |
Resources
Regulatory Data Sheet
Document Number: MSDS_3544772_US_EN_RDS
(PDF)
Similar products
| Connection Width (Metric) | 3.962 mm, 4.75 mm, 6.35 mm | |||
| Connection Width (Imperial) | 0.156 in, 0.187 in, 0.25 in | |||
| Maximum Conductor Size (Imperial) | 10 AWG, 14 AWG, 18 AWG | |||
| Maximum Conductor Size (Metric) | 1 mm², 2.5 mm², 6 mm² | |||
| Minimum Conductor Size (Metric) | .34 mm², 1.5 mm², 4 mm² | |||
| Minimum Conductor Size (Imperial) | 12 AWG, 16 AWG, 22 AWG |
3M™ Scotchlok™ Non-Insulated Butted Seam Male Disconnects
3M™ Scotchlok™ Non-Insulated Interlock Barrel Female Disconnects
3M™ Scotchlok™ Non-Insulated Butted Seam Pin Terminals
3M™ Scotchlok™ Non-Insulated Seamless Compression Butt ConnectorsLegal disclaimer
Manufacturing Origin: USA
The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.
Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.
Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
