Contact a Sales Rep
Thank You!
Your form was submitted successfully.
Our Apologies...
An error has occurred while submitting. Please try again later...
3M™ Scotchlok™ Non-Insulated Brazed Seam Block Forks
- | Select product options for IDs.
Typical properties
| Barrel Inside Diameter | 0.070 Inch, 0.090 Inch, 0.135 Inch |
| Barrel Length (Imperial) | 0.25 Inch |
| Barrel Style | Brazed |
| CSA File Number | LR22190 |
| Clearance (C) | 0.25 Inch, 0.29 Inch |
| Dimension E | 0.50 Inch, 0.5 Inch, 0.54 Inch |
| Fork Type | Block |
| Insulation Material | Non-insulated |
| Maximum Conductor Size (Imperial) | 10 AWG, 14 AWG, 18 AWG |
| Maximum Conductor Size (Metric) | .0823 mm², 2.08 mm², 5.26 mm² |
| Minimum Conductor Size (Imperial) | 12 AWG, 16 AWG, 22 AWG |
| Minimum Conductor Size (Metric) | 0.326 mm², 1.31 mm², 3.31 mm² |
| Product Color | Metal |
| Stud Diameter (Imperial) | 0.138 in, 0.164 in, 0.19 in |
| Stud Diameter (Metric) | 3.505 mm, 4.166 mm, 4.826 mm |
| Stud Size | #6, #8, #10 |
| Terminal Style | Block |
| Terminal Type | Fork |
| UL File Number | E23438, E70512 |
| Units per Case | 500.0, 1000.0 |
| Overall Length (Imperial) | 0.65 in, 0.73 in |
| Overall Length (Metric) | 16.51 mm |
| Overall Width (Imperial) | 0.25 in, 0.3 in, 0.32 in |
| Overall Width (Metric) | 7.62 mm |
Resources
Regulatory Data Sheet
Document Number: MSDS_3724853_US_EN_RDS
(PDF)
Legal disclaimer
Manufacturing Origin: USA
The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.
Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.
Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
