Contact a Sales Rep
Thank You!
Your form was submitted successfully.
Our Apologies...
An error has occurred while submitting. Please try again later...
3M™ Scotchlok™ Nylon Insulated with Insulation Grip Block Forks
- | Select product options for IDs.
Typical properties
| Barrel Inside Diameter | 0.070 Inch, 0.090 Inch, 0.135 Inch |
| Barrel Style | Butted |
| CSA File Number | LR22190 |
| Clearance (C) | 0.25 Inch, 0.29 Inch |
| Dimension E | 0.69 Inch, 0.71 Inch, 0.84 Inch |
| Fork Type | Block |
| Insulated | Yes |
| Insulation Material | Nylon with Insulation Grip |
| Material | ETP Copper, Plastic |
| Maximum Conductor Size (Imperial) | 10 AWG, 14 AWG, 18 AWG |
| Maximum Conductor Size (Metric) | .0823 mm², 2.08 mm², 5.26 mm² |
| Maximum Insulation Outer Diameter (Imperial) | 0.145 in, 0.17 in, 0.25 in |
| Maximum Insulation Outer Diameter (Metric) | 3.7 mm |
| Maximum Insulation Outside Diameter | 0.145 in |
| Maximum Operating Temperature (Celsius) | 105 ℃ |
| Maximum Operating Temperature (Fahrenheit) | 221 ℉ |
| Maximum Recommended Voltage Rating | 600 V |
| Minimum Conductor Size (Imperial) | 12 AWG, 16 AWG, 18 AWG, 22 AWG |
| Minimum Conductor Size (Metric) | 0.326 mm², 0.823 mm², 1.31 mm², 3.31 mm² |
| Product Color | Red, Yellow, Blue |
| Stud Diameter (Imperial) | 0.138 in |
| Stud Diameter (Metric) | 3.505 mm |
| Stud Size | #6, #8, #10 |
| Terminal Style | Block |
| Terminal Type | Fork |
| UL File Number | E23438 |
| Units per Case | 500.0 |
| Overall Length (Imperial) | 0.84 in, 0.86 in, 1.03 in |
| Overall Length (Metric) | 21.336 mm, 21.844 mm, 26.162 mm |
| Overall Width (Imperial) | 0.25 in, 0.3 in, 0.32 in |
| Overall Width (Metric) | 6.35 mm, 7.62 mm, 8.128 mm |
Resources
Regulatory Data Sheet
Document Number: MSDS_3750031_US_EN_RDS
(PDF)
Regulatory Data Sheet
Document Number: MSDS_3750056_US_EN_RDS
(PDF)
Regulatory Data Sheet
Document Number: MSDS_3750072_US_EN_RDS
(PDF)
Legal disclaimer
Manufacturing Origin: USA
The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.
Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.
Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
