Contact a Sales Rep
Thank You!
Your form was submitted successfully.
Our Apologies...
An error has occurred while submitting. Please try again later...
3M™ Copper Oil Seal Lugs
- | Select product options for IDs.
Details
Highlights
- Standard barrel ensures a secure fit and offers reliable performance
- A solid oil stop seals oil and moisture
- Made of copper for good conductivity and tin plating for corrosion resistance
- Rated for 35 kV voltage applications
- RoHS 2011/65/EU Compliant
3M™ Oil Seal Lugs OS Series are copper one hole and two hole lugs that feature a solid oil stop. These lugs are for copper conductors only and are used with 3M™ PILC Termination Kits 5800 Pb Series on paper insulated lead covered (PILC) cables. Each lug is electro tin plated to resist electrolytic corrosion.
Typical properties
| Barrel Length (Imperial) | 1.563 in, 1.875 in, 2.875 in |
| Barrel Length (Metric) | 39.7 mm, 47.63 mm, 73.03 mm |
| Barrel Style | Standard Barrel |
| Case Quantity | 3, 10 |
| Center of Hole to Center of Hole | 1.75 Inch |
| Center of Hole to Center of Hole (Metric) | 44.5 mm |
| Center of Hole to End of Pad | 0.406 Inch, 0.625 Inch |
| Center of Hole to End of Pad (Metric) | 10.3 mm, 15.8 mm |
| Compatible Conductor Size (Imperial) | 1/0 AWG, 250 kcmil, 750 kcmil |
| Compatible Conductor Size (Metric) | 50 mm², 120 mm², 400 mm² |
| For Use With | Copper Conductor Only |
| Inside Diameter (Imperial) | 0.394 in, 0.595 in, 1.031 in |
| Inside Diameter (Metric) | 10.0 mm, 15.1 mm, 26.2 mm |
| Lug Type | Compression Lugs |
| Material | Copper |
| Maximum Conductor Size (Imperial) | 1/0 AWG, 250 kcmil, 750 kcmil |
| Number of Stud Holes | 1 , 2 |
| Outer Diameter (Imperial) | 0.513 in, 0.75 in, 1.3 in |
| Stud Sizes | 1/2 Inch, 3/8 Inch |
Resources
Regulatory Data Sheet
Document Number: MSDS_3802600_US_EN_RDS
(PDF)
Legal disclaimer
Manufacturing Origin: USA
The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.
Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.
Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
