3M™ Cold Shrink Inline Splice Kits 5730 Series
- | Select product options for IDs.
Details
Highlights
- Designed for use with armor power cable
- Used for indoor and outdoor installations
- Perfect for use in aerial, direct-burial and submersible applications
- Rated for up to 1 kV applications
- Includes 1 PST jacket tube, constant force springs, shielding tape 24 strips and 1 copper shielding sleeve
- CSA Certified and RoHS 2011/65/EU Compliant
3M™ Cold Shrink Inline Splice Kits 5730 Series are applicable for indoor and outdoor installations, including direct burial, aerial and submersible applications.
Each 3M™ Cold Shrink Inline Splice Kits 5730 Series requires at least 1 roll of 3M™ Sheath Wrap. For use with 3/C or 4/C Armor Power Cable (Teck-90) up to 1000 V. 3M™ 3/C Armored Power Cable 5730 Series accommodates a full range of cable sizes from 14 AWG–750 kcmil. The overall jacket diameter ranges from 16–102 mm (0.62–4.00” ). Notes: Connectors are not included in the kit. Use only CSA certified compression connectors. Vinyl or nylon butt connectors are preferred for 5730 and 5731 series. Amount of Sheath Wrap needed is based on two half-lapped layers and 4.57 m (15’) rolls
Typical properties
Resources
Similar products
| Voltage | 1 kV, 600 kV, 600 V, 1000 V | |||
| Conductor Sizes (Imperial) | 1/0 AWG, 4 AWG, 250 kcmil, 10 AWG, 500 kcmil, 750 kcmil | |||
| Cable Shielding | Jacketed Concentric Neutral (JCN), Concentric Neutral (CN), Non-shielded | |||
| Maximum Conductor Size (Imperial) | 1/0 AWG, 4 AWG, 250 kcmil, 10 AWG, 500 kcmil, 750 kcmil | |||
| Maximum Conductor Size (Metric) | 50 mm², 25 mm², 120 mm², 6 mm², 240 mm², 400 mm² | |||
| Conductor Sizes (Metric) | 50 mm², 25 mm², 120 mm², 6 mm², 240 mm², 400 mm² |
3M™ Cold Shrink Inline Splice Kits 5730 Series
3M™ PILC Splice Kits
3M™ Scotchcast™ Cold Shrink Inline Splice Kits 5750 Series
3M™ Cold Shrink Quick Insulators QI SeriesLegal disclaimer
The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.
Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
