3M™ Cold Shrink Branch Splice Adapter Kits
- 3M ID B00014007
Details
Highlights
- Perfect for tape shield, wire shield and UniShield® cables
- Rated for 15 kV applications
- IEEE Approved
The 3M™ Cold Shrink Branch Splice QS-2001B molded rubber splice kit is designed to connect extruded dielectric power cables rated 15 kV. The basic kit handles the main and branch cable range from 350–500 kcmil. (See note below for cable between 2 AWG-250 kcmil.)
The 3M™ Cold Shrink Branch Splice QS 2001B lets you easily splice and tap extruded dielectric power cables rated up to 15kV. This silicone rubber splice provides economical, effective installations without force pushing, pulling or heat. For installations on cables with a conductor size range of #2 AWG through 250 kcmil cable, this adapter kit must be used in conjunction with the standard 3M Cold Shrink Splice Kit QS 2001B, building up the outside diameter of the cable insulation so that the splice body will fit the cable. This kit utilizes the QS-2000 cold shrink technology and consists of a multi-layer silicone rubber splice and stress control body, each expanded on a removable, supporting polymeric core. Kits contain sufficient material to make one branch splice. Note: For 2 AWG-250 kcmil cable, the 3M™ Cold Shrink Branch Splice Adapter QS-2000BA must be ordered and used in conjunction with the 3M™ Cold Shrink Branch Splice Kit QS-2001B. The adapter kit will increase the cable insulation O.D. so that the cable will work with the splice body. Order one adapter kit for each cable end (3 maximum/splice) below 350 kcmil (185 mm²) conductor size. Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.
Typical properties
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
